Plast - Special

Materials:
For plastic models, and in conjunction with other materials such as wood, cardboard, paper, etc.

Instructions:
Thoroughly clean the surfaces to be stuck together (dry, free of dust and grease).
Apply a thin layer of adhesive to one side; place the parts together and hold in place for a short time.
Don't wipe off remnants of adhesive while wet; wait until it has hardened and remove using a sharp knife or a cutter, then rub lightly with glass paper.
Firm after approx. 5 to 10 minutes; final strength achieved after 24 hours.
For thin plastic, apply a very thin layer of adhesive.


30g - 34ml